Do you have a question about the GeoVision GV-EFD2101 and is the answer not in the manual?
Camera Type | Dome |
---|---|
Max Resolution | 1920 x 1080 |
Frame Rate | 30 fps at 1920 x 1080 |
Lens | Fixed |
IR LED | Yes |
IR Distance | Up to 30 m (98.4 ft) |
Day/Night | Yes |
Wide Dynamic Range (WDR) | Yes |
Digital Noise Reduction (DNR) | 3D DNR |
Audio | No |
Network Interface | 10/100 Ethernet |
ONVIF | Yes |
Weather Resistance | IP67 |
Image Sensor | 1/2.8" CMOS |
Video Compression | H.264 |
Protocols | TCP, UDP, HTTP, SMTP, FTP, DHCP, NTP, UPnP |
Power Supply | 12V DC / PoE |
Operating Temperature | -10°C ~ 50°C |
Provides a general description and diagram of the Box Camera.
Explains how to connect the Box Camera to power and network.
Provides a general description and diagram of the Ultra Box Camera.
Details the installation steps for the Ultra Box Camera.
Explains how to connect the Ultra Box Camera to power and network.
Provides a general description and diagram of the Target Box Camera.
Details the installation steps for the Target Box Camera.
Explains how to connect the Target Box Camera to power and network.
Provides a general description and diagram of the IR Arctic Box Camera.
Details the installation steps for the IR Arctic Box Camera.
Explains how to connect the IR Arctic Box Camera to power and network.
Provides a general description and diagrams of Mini Fixed Dome/Rugged Dome cameras.
Details the installation steps for Mini Fixed Dome/Rugged Dome cameras.
Explains how to connect Mini Fixed Dome/Rugged Dome cameras.
Details the installation steps for the Target Mini Fixed Dome.
Details the installation steps for the Target Mini Fixed Rugged Dome.
Details the installation steps for the Bullet Camera (Part I).
Details the installation steps for the Bullet Camera (Part II).
Details the installation steps for the Bullet Camera (Part III).
Details the installation steps for the Ultra Bullet Camera.
Details the installation steps for the Target Bullet Camera (Part I).
Details the installation steps for the Target Bullet Camera (Part II).
Details the installation methods for the Vandal Proof IP Dome (Part I).
Details the installation steps for the Vandal Proof IP Dome (Part II).
Details the installation steps for the Vandal Proof IP Dome (Part III).
Details the installation steps for the Target Vandal Proof IP Dome.
Details the installation methods for the Fixed IP Dome.
Details the installation steps for the Target Fixed IP Dome.
Details the installation steps for the Cube Camera.
Details the installation steps for the Advanced Cube Camera.
Details the installation methods for the PT Camera.
Details the installation steps for the Pinhole Camera.
Guides on how to access the live view of the camera.
Explains how to find the camera's IP address using utility.
Details how to configure the camera's IP address via Web interface.
Explains how to adjust image clarity using the GV-IP Device Utility.
Guides on restoring default settings via the Web interface.
Details on restoring default settings directly using the camera's buttons.