EasyManua.ls Logo

GeoVision GV-NAS2008 User Manual

GeoVision GV-NAS2008
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
User's Manual
GV-NAS System
NASV101-UM-A
Question and Answer IconNeed help?

Do you have a question about the GeoVision GV-NAS2008 and is the answer not in the manual?

GeoVision GV-NAS2008 Specifications

General IconGeneral
RAM2 GB DDR3
Number of Supported HDDs8
RAID SupportRAID 0, 1, 5, 6, 10, JBOD
Network Interface2 x Gigabit Ethernet
Operating SystemLinux-based
HDD InterfaceSATA 3Gb/s
ProtocolsCIFS, NFS, FTP, AFP, iSCSI
ProcessorIntel Atom D525 1.8 GHz Dual-Core

Summary

Introduction

Installing the Hard Disks

Provides step-by-step instructions for installing hard drives into the GV-NAS System.

Getting Started

Accessing the GV-NAS System

Guides users on how to log in to the GV-NAS System via a web browser.

Creating RAID

Details the process of formatting disks and creating RAID configurations for data protection.

Network Settings

Covers configuration of IP addresses, subnet masks, and DNS for network connectivity.

Recording GV-IP Cameras to GV-NAS System

Instructions on how to save recordings from GV-IP cameras to the NAS.

System Administration

Management Applications

Disk & RAID Management

Tools for managing storage volumes, RAID arrays, and disk information.