Need help?Do you have a question about the GeoVision GV-VS2800 and is the answer not in the manual?
General| Brand | GeoVision |
|---|---|
| Model | GV-VS2800 |
| Category | Recording Equipment |
| Language | English |
Lists various GV-Video Server models and their key features like video inputs, compression, and audio support.
Provides basic connection steps to install the GV-Video Server on a network.
Explains how to find the GV-Video Server's IP address using the GV-IP Device Utility.
Guides on assigning a static IP address or configuring network settings via the web interface.
Steps to access surveillance images via a web browser using Administrator or Guest login.
Explains the controls within the Live View window, such as Play, Stop, Snapshot, and Recording.
Details functions available through the Live View control panel, including Information, Video, Audio, and I/O Control.
Compares supported functions across different GV-Video Server models.
Details settings for video codec, resolution, and bandwidth for dual-stream models.
Configures pre-alarm, post-alarm recording, split intervals, and audio recording.
How to configure motion detection zones and sensitivity for up to 8 areas.
Configures PTZ camera connections, protocols (HD-TVI, AHD, RS-485), and coaxial settings.
Configuration for sending email alerts with captured snapshots upon trigger events.
Settings for sending captured snapshots to a remote FTP server for alerts.
Allows backing up recordings and system logs to a PC-based GV-Backup Center.
Enables remote playback of recorded files from the GV-Video Server.
Options to start recording manually, by schedule, or by input trigger.
Configures time frames (Span 1-3), weekends, and special days for recording schedules.
Functionality to play back recorded files using the Remote ViewLog program over TCP/IP.
Introduces basic but important network configurations for connecting to a TCP/IP network.
Configures LAN settings using Static IP, DHCP, or PPPoE.
Covers settings for date/time, USB storage, user accounts, firmware, and system operations.
Manages external USB mass storage devices, including formatting and disk information.
Executes system operations like host settings, auto reboot, database repair, and firmware check.
Steps to enable recording function, including attaching storage, setting pre/post-recording, and schedules.
Methods for playing back recorded video files using USB storage or Remote ViewLog.
How to play back files using USB storage, requiring ExtFS driver for Windows.
Procedures for updating the GV-Video Server firmware using the web interface or IP Device Utility.
Procedures for resetting the GV-Video Server to its original factory default settings.
Step-by-step guide to add GV-Video Server cameras to GV-DVR / NVR systems.
Guide to add GV-Video Server cameras to GV-VMS systems.
To Next Page
