Need help?Do you have a question about the GeoVision PN400 and is the answer not in the manual?
General| Brand | GeoVision |
|---|---|
| Model | PN400 |
| Category | Digital Signage |
| Language | English |
Provides step-by-step instructions for connecting the PN300, PN400, and SQP133 devices.
Introduces the main setup menu options for device configuration.
Configures the video output type (VGA/HDMI) and screen resolution for the device.
Configures the system's local time and time zone settings.
Establishes wired or wireless network connections for device management.
Details the procedure for updating the device's firmware from a storage device.
Guides on how to reset the device to its original factory default configuration.
Presents the main setup menu options specific to the PN400 device.
Adjusts general device parameters like name, language, and resolution.
Explains the process of updating the PN400's firmware from a storage device.
Configures network settings for the PN400, including DHCP and static IP.
Sets the system time, date, and timezone for the PN400 device.
Configures the PN400 to connect to CMS Lite or CMS Server for management.
Provides instructions for installing the Content Designer software.
Guides on designing digital signage projects, including screen layout and content.
Explains how to play projects created with Content Designer on the devices.
Details how to create weekly schedules for device startup and media playback.
Details how to configure and connect digital signage devices to CMS Lite.
Guides on configuring and connecting digital signage devices to the CMS Server.
Details the process of upgrading device firmware using the CMS Server.
To Next Page
