C cover.
3. Hold the unit in place with one hand.
Locate the bulb and reach into the cylinder.
4. Turn the bulb in a counter-clockwise direction (left) to loosen from the socket.
5. Take new bulb and screw into unit using a clockwise motion. Wipe off fingerprints with a dry cloth.
6. Reassemble by reversing steps 1&2. Turn the unit back on and hold the UV-C control button for 5
seconds to reset UV-C indicator light.
IMPORTANT: The UV-C bulb should be
replaced every 10 months depending
on use
To Previous Page
Loading...