Safety continued EN
■ The equipment must only be used with fluids that are not aggressive in contact with the materials
and seals of the equipment. Otherwise, leaks may occur and hot or toxic fluid may escape.
■ The equipment and its components may only be installed and removed by specialist personnel.
Specialist personnel must have knowledge and experience of the following areas:
■ Producing pipe connections.
■ Selecting suitable lifting gear for the product, and using it safely.
■ Working with hazardous (contaminated, hot or pressurised) fluids.
Risk of minor injury
■ There is a risk of cuts from sharp-edged internal parts of the equipment. Always wear protective
gloves when working on the equipment.
■ If the equipment is inadequately supported during installation, there is a risk of crushing if it falls. Use
the eyebolt to secure lifting gear, if available. Secure the equipment during installation so it cannot
fall. Wear sturdy safety boots.
To Next Page
Loading...
