Taking the equipment out of service/disposal
■ Using suitable decontamination methods, make sure the equipment and pipe are free from
fluid residues.
■ Dispose of all residues in accordance with the regulations at the location of use.
■ To remove the equipment, proceed in reverse order to installation.
■ Dispose of the equipment in accordance with the regulations at the location of use.
You can find information on the equipment material in the data sheet and on the equipment.
Please notify the contracting party before sending any returns.
■ Attach a completed and signed declaration of decontamination to the outside of the return
shipment.
■ Replace damaged equipment with new.
EN
To Next Page
Loading...
