2
1. GENERAL
1.1 Notice of installation
To make sure of a safe and correct operation, please check
the below items before installing the machine:
1) Power source capacity must be larger than the machine
need.
2) A shorter ground wire is better.
3) Machine standard power is 110V/230V (-15% - +10%).
4) Machine standard power Hertz is 50/60 Hz. (±2%)
5) Machine is good between temperatures 0℃ - 45℃ .
6) Any thing/substance around the machine should not produce loud
noise and vibration.
1.2 Notice of operation
To have good protection for the operator, please make sure of the
following conditions:
1) Before operating, please read the machine manual carefully.
2) Make sure no good have been put on the power cable.
3) Make sure no goods been have put on the upper tape head unit.
4) Don’t allow damp parts or water to touch the electric parts.
To Next Page
Loading...