GET GPACU8 - Troubleshooting

PROBLEMS REASONS SOLUTIONS
Air conditioner stops
operating.
• Power has been
cut off.
• The plug has not
been plugged in
properly.
• The Full-tank
indicator is ON-
Tank is full.
• Wait for power to
be supplied again.
• Plug in again.
• Drain the water
tank.
Air conditioner suddenly
stops during operation.
• The indoor
temperature has
reached the set
temperature level.
• The preset time
has elapsed.
• The Full-tank
indicator is ON-
Tank is full.
• Reset the
temperature level.
• Reset the timer.
• Drain the water
tank.
Air conditioner runs
intermittently.
• Malfunction.
• Surrounding
temperature is too
high or too low.
• Heat exhaust hose
is blocked.
• Contact the service
centre.
• Check the hose.
Air conditioner functions
but the room is not cooled.
•
Window or door is
left open in the
room.
• There is heat
source in the room
or too many people
in it.
• Filter is too dirty.
•
Temperature
settings are too
high.
•
Close all windows
and doors.
• Move out any heat
source in the room.
• Clean the filter.
•
Lower the
temperature
setting.
Condensed water is
spilled out when moving
the unit.
• The tank is nearly
full.
• Remove the water-
draining plug on
the rear bottom of
the unit. Drain the
water tank.