To Next Page

To Previous Page

HOW TO START PETROL VEHICLES (12V) USING JUMPSTARTER:

1. Completely insert the

connector with the clamps into

the outlet port with a rubber cap

marked with an open hood car.

2. The LED on the clamps

connection unit will start blinking

red and green, showing the device

is ready to be connected to the

battery.

3. Connect the red clamp to the

battery’s positive (+) terminal

and the black clamp to its

negative (-) terminal.

WARNING: do not to invert

the two clamps for any reason.

4. Turn on the vehicle using the

JumpStarter only if at least 3 LEDs

are lit on the charge indicator.

Questions and Answers:

Need help?

Do you have a question about the GET JUMPSTARTER MINI and is the answer not in the manual?

GET JUMPSTARTER MINI Specifications

General