EasyManuals Logo

GET JUMPSTARTER MINI User Manual

GET JUMPSTARTER MINI
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Indicator No light 1 LED 2 LED 3 LED 4 LED
Charge level 0% 25% 50% 75% 100%
MAIN FUNCTIONS & FEATURES
Emergency electronic mini starter: it allows to restart any motorbike and scooter
(including watercrafts and small boats) when they have a low charged battery.
LED Torch: 3 different high-intensity light mode (steady, SOS, strobo).
Powerbank: light and compact device to recharge your mobile
devices wherever you are.
Handy and useful: simple to be brought with you everyday in your
backpack, luggage or purse.
Easy to use: no difficult procedures to remember, no settings to change.
Maximum safety: best protection against short circuit, overcharge, over
discharge, overheating, reverse polarity.
D. OPERATION
HOW TO RECHARGE JUMPSTARTER:
1. Connect the USB charger cable to a charger (not included) or USB port.
2. Connect the micro USB to the device’s 5V1A input port.
CHARGE INDICATOR:
Press the button to check the JumpStarter’s charge level:
EN
The LEDs will light on one after the other during charging.
The number of LEDs lit up shows JumpStarter’s charge level (see table
above). Once the charge process is completed, all the LEDs will be on. All
LEDs will turn off when charging is interrupted.
A full charge process will take around 2 hours.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GET JUMPSTARTER MINI and is the answer not in the manual?

GET JUMPSTARTER MINI Specifications

General IconGeneral
BrandGET
ModelJUMPSTARTER MINI
CategoryRemote Starter
LanguageEnglish