Getac UX10 Series Operation Guide

1
English
Getting Started
Unpacking
UX10 Tablet PC Document(s)
AC adapter AC power cord
Battery pack Stylus
Tether
Installing the Micro-SIM Card
(Optional)
1. Remove one screw to detach the small metal
plate that covers the micro-SIM card socket.
2. Slide the socket cover toward the unlocked
direction ( ) and open the cover.
3. Noting the orientation, put down the micro-
SIM card on the socket.
4. Close the cover and slide it back to the
locked position ( ).
5. Replace the metal plate and secure it in
place with the screw previously removed.
Installing the Battery Pack
1. With the battery pack correctly oriented,
attach its connector side to the battery com-
partment at an angle (

) and then press down
the other side (

). The battery release latch
should automatically engage.
2. Slide the security lock to the locked position
( ).
CAUTION: Make sure the lock is correctly locked,
not revealing the underneath red part.
Connecting to AC Power and
Starting Up
You must use AC power when starting up the
Tablet PC for the very first time.
1. Connect the AC adapter as shown below.
NOTE: The power cord type varies with countries.
2. Press the power button ( ) to start up.
3. When turning on your Tablet PC for the very
first time, you will be guided through a
setup process.
Tap the touchscreen with your finger to
communicate with the Tablet PC.
Battery
release latch

Getac UX10 Series Specifications

General

Resolution	1920 x 1200 pixels
Storage	Up to 512GB SSD
Operating System	Windows 10 Pro
Rugged Features	MIL-STD-810H
Graphics	Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Camera	Rear: 8MP
Security	TPM 2.0
Touchscreen	Capacitive
Connectivity	Optional 4G LTE
Display Size	10.1 inches
Processor	Intel Core i5 or i7
I/O Ports	USB 3.2 Gen 1 Type A x1 USB 3.2 Gen 2 Type C x1 Headphone / Microphone combo x1 DC in x1 Optional: Serial port (RS-232) x1, LAN (RJ45) x1, HDMI x1, Display Port x1, External antenna port for WWAN and GPS