ULTIMA series ACCESS TO THE USER’S MENU
NU_ULTIMA_02_EN_1612 41
6. EDIT PROGRAMS
Selecting a program from main menu (P5 in this example) will
open a menu in which you can perform different functions related
to program cycles.
Pressing the
icon will allow you to edit the program
parameters.
The sequence selection menu is shown.
Press the
icons to page up/down.
Pressing on sequence name (PREWASH 1 in this example) will
open a menu in which the parameters for the selected sequence
can be changed).
Pressing on one of the parameters will open a numeric keypad for
Time, Temp or Chemical Volume and a selection list for Water
Source.
To Next Page
Loading...
Need help?
General
