Need help?Do you have a question about the Geutebruck G-Cam/E2 Series and is the answer not in the manual?
General| Image Sensor | 1/2.8" CMOS |
|---|---|
| Sensor Type | Progressive Scan |
| Focal Length | 2.8 - 12 mm |
| Aperture | F1.4 |
| IP Rating | IP66 |
| Resolution | 1920x1080 (Full HD) |
| Day/Night | Yes (ICR filter) |
| IR Range | Up to 30m |
| Video Compression | H.264, H.265, MJPEG |
| Protocols | ONVIF, RTSP, HTTP, HTTPS, TCP/IP, UDP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPnP, IPv4, IPv6 |
| Operating Temperature | -30°C to +60°C |
| Power Supply | PoE (IEEE 802.3af), 12V DC |
Step-by-step guide for mounting the camera body.
Instructions for installing the camera without a bracket.
Guidance on using the template for marking and drilling holes.
Procedure for drilling mounting holes and inserting anchors.
Instructions for connecting power and data cables.
Requirement for network connection to adjust zoom and focus.
Navigating the web interface to control lens adjustments.
Steps to configure the camera's network settings.
Configuring the camera in a standard IP network using MAC conversion.
Using IPAdminTool to scan and manage network cameras.
Procedure to change the camera's IP address via IPAdminTool.
Procedure for installing necessary browser add-ons for video streaming.
Procedures for restoring the camera to factory default settings.
Instructions on how to start the GscSetup application.
Navigating through GscSetup to reach hardware settings.
Choosing the appropriate camera plugin from the available list.
Procedure for setting up media channels for video transmission.
Configuring video streaming parameters like resolution and codec.
Adjusting camera movement and focus through GscSetup.
Note on necessary G-Core/CamConnect options for IP camera setup.
Procedure to request and purchase additional software options.
Establishing a network connection to a G-Core server.
Activating and configuring media channels for connected cameras.
Choosing cameras and editing their general and specific data.
Overview of all defined camera settings before finalization.
To Next Page
