Gewiss JOINON WALLBOX I-CON DLM User And Installation Manual

Gewiss JOINON WALLBOX I-CON DLM

260 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

JOINON WALLBOX

I-CON DLM

IT EN

ES HU

FR DE RO NL

Manuale di utilizzo ed installazione - User and installation manual - Manuel

d'installation et d'exploitation - Manual de uso e instalación - Installations- und

Bedienungsanleitung - Manual de utilizare și instalare - Használati és telepítési

útmutató - Gebruiks- en installatiehandleiding

UNITÀ DI RICARICA VEICOLI ELETTRICI JOINON WALLBOX I-CON DLM - JOINON WALLBOX I-CON

DLM ELECTRIC VEHICLE RECHARGING UNIT - UNITÉ DE RECHARGE DE VÉHICULES ÉLECTRIQUES

JOINON WALLBOX I-CON DLM - UNIDAD DE CARGA PARA VEHÍCULOS ELÉCTRICOS JOINON

WALLBOX I-CON DLM - LADESTATION FÜR ELEKTROFAHRZEUGE JOINON WALLBOX I-CON DLM -

STAȚIE DE ÎNCĂRCARE PENTRU VEHICULE ELECTRICE JOINON WALLBOX I-CON DLM -

ELEKTROMOS JÁRMŰVEK TÖLTŐEGYSÉGE JOINON WALLBOX I-CON DLM - OPLAADEENHEID VOOR

ELEKTRISCHE VOERTUIGEN JOINON WALLBOX I-CON DLM

Table of Contents

Other manuals for Gewiss JOINON WALLBOX I-CON DLM

Questions and Answers:

A
Ashley GrahamAug 5, 2025
What to do if Gewiss JOINON WALLBOX I-CON DLM Automobile Accessories display Error 14?
- L
  laurathompsonAug 5, 2025
  If the station detects a short-circuit between the CP signal and earth, remove the cable and try again. If the error persists, replace the cable.
K
Kimberly MooreAug 13, 2025
What to do if Gewiss Automobile Accessories display Error 8?
- A
  andrea52Aug 13, 2025
  If you encounter Error 8, check the Modbus line connection, the power supply to the energy meters, and ensure the energy meters are working properly. Also, verify that the component on the Modbus line is numbered correctly.
C
cgonzalezAug 20, 2025
What to do if Gewiss JOINON WALLBOX I-CON DLM Automobile Accessories display Error 13?
- C
  Chelsea AndersenAug 20, 2025
  If Error 13 appears, the charging session is immediately suspended. Remove the recharging cable from the vehicle and wait before beginning a new session. If the problem continues, it's recommended to contact the vehicle manufacturer.
L
Lance BarronAug 28, 2025
How to fix Error 4 on Gewiss JOINON WALLBOX I-CON DLM?
- A
  acraigAug 28, 2025
  Check the signal from the electronic board to the contactor to ensure the board is controlling it. If not, verify that the contactor contacts aren't jammed. If necessary, replace the device.

Gewiss JOINON WALLBOX I-CON DLM Specifications

General

Manufacturer	Gewiss
Model	JOINON WALLBOX I-CON DLM
Charging Mode	Mode 3
Connector Type	Type 2
Rated Voltage	230/400 V AC
Max Output Power	22 kW
DLM	Dynamic Load Management
Protection Degree	IP55
Impact Resistance	IK10
Mounting	Wall-mounted
Color	White/Grey
Product Category	Electric Vehicle Charger
Communication Protocol	OCPP 1.6
Connectivity	Wi-Fi, Ethernet, Bluetooth
Type	Wallbox
Voltage	230/400 V AC
Cable Length	5m

Related product manuals

Gewiss JOINON Home GW68101