Need help?Do you have a question about the Geyser EURO and is the answer not in the manual?
General| Brand | Geyser |
|---|---|
| Model | EURO |
| Category | Water Filtration Systems |
| Language | English |
Details on tap thread types (22mm external, 24mm internal) compatible with the filter.
Step-by-step instructions for installing the filter on a tap, including aerator removal.
Explains why the Aragon cartridge is kept slightly wet for preservation and its technical requirement.
Two signs indicating when to replace the cartridge: pressure drop and changes in water taste/smell.
Instructions on how to change the filter cartridge using the supplied plastic key.
Explains why low pressure is recommended for better purification and material contact.
Discusses why TDS meters are not suitable for measuring water hardness after using ion-exchange filters.
Describes the Aragon material and its three filtration methods: mechanical, sorption, and ion exchange.
Specifies the filter is for cold tap water purification and permanent installation at the tap.
Details the percentage efficiency for various impurities at different volumes (150L, 1000L, 3000L).
Lists key specifications like filter life, recommended speed, and connection type (M22x1 external, M24x1 internal).
Provides alternatives for filter setup on faucet spouts with different thread types (M22x1, M24x1).
Steps for initial setup, including removing air locks and flushing the new filter element.
Guidance on filter operation, including rinsing after interruptions and signs of blockage.
Detailed steps for mechanical cleaning and restoring ion-exchange properties of the filter element.
Advises on protecting the filter from damage, keeping it moist, and careful handling during extraction.
Outlines conditions under which warranty liability is void, such as mechanical damage or misuse.
Section for recording warranty information such as release date and sale date.
To Next Page
