GF GFPRO - Page 8

8
EN
4. PROGRAMMING
4.1 PRESET PROGRAMS
Click on Preset Programs in the main control panel. Select the icon for the
required program (Above-ground Irrigation or Drip Irrigation) then select
Save
To deselect previously selected programs, click on Preset Programs again and
then on Cancel.
The indication ON or OFF appears in the main control panel alongside Preset
Programs depending on whether or not the function is selected.
4.2 PERSONALIZED PROGRAMMING
Click on Personalized Programming in the main control panel. Open the
programs overview page then click on the icon at the top right of the screen
to add a program
Now start the programming procedure by clicking on Start Irrigation, then
set the program start time (hours-minutes) and click on OK. Click on Days and
select the preset program duration minutes, or select Cancel to go back. Finally,
select the days of the week when you want the program to start and then click
on Save
The program you have just set up will be shown in the overview page. To add a
new program re-select the icon at the top right of the screen. IMPORTANT:
You can set a maximum of 4 program starts per day.
To delete a program, go to Personalized Programming, select the set program
and then select Delete timer.
The indication ON or OFF appears in the main control panel alongside
Personalized Programming, depending on whether or not the function is
selected
4.3 SMART ECO
If this function is selected, the application automatically recognises the current
season and adapts the duration of the previously set programs to avoid
wastage of water.
Click on Smart Eco then select or deselect the function by clicking on the icon at
the bottom right of the page. If the icon is LIGHT BLUE, the function is on, while
if it is GREY, the function is o.
The indication ON or OFF appears in the main control panel alongside Smart
Eco, depending on whether or not the function is selected.
IMPORTANT: the Function does not replace the program/programs, but rather
adapts the duration of a previously set program(s). You must therefore set at
least one program (Preset or Personalized)
4.4 VERY HOT WEATHER / RAINY WEATHER FUNCTION
Based on the next 5 days, you can increase or decrease the duration of
previously set programs manually in accordance with forecasts for very hot or
very rainy weather
GF33491015_GF80006017_GF80286017_libr.istruz.7,5x13_APP GFPRO 6lingue_19.2.indd 829/01/19 13:38