GLOBAL FURNITURE ALLIANCE LTD
t. 01291 645080
f. 01291 645099
e. sales@gfa.uk.com
www.gfa
.uk.com
ASSEMBLY
STEP 3
Align the holes on the chair spindle (H) and the holes on the chair legs (F) as shown,
tighen the legs to the spindle one by one with allen key screws (M) and washers (N) by
using M6 allen key .
Then align the hole at the centre of the extension tube to the chair spindle, press the seat
cushion down so that it rests firmly .
To Next Page
Loading...