Declaration of Conformity
Key Features
433.92 MHz Rolling
Code Transmitter
VR/TF2E 2 Channel
40019030 00001
VR/TF4E 4 Channel
40019031 00001
The transmitter must be used with a
compatible receiver. The transmitter code
changes on every activation to prevent
scanning or copying of the signal.
A special algorithm keeps the transmitter and
receiver synchronised. (Keeloq® Hopping
code)
A factory set serial number identifies each
transmitter. The serial number is stored in the
receiver memory during commissioning.
These instructions are for Doors with TS 970 or TS 981 Controls and Radio
Receiver VR/R2E. For Doors with TS 971 Controls refer to the TS 971
Instruction book
Only transmitters whose codes are held
in the receiver memory will activate the
receiver.
Supply: 12 Vdc
Battery type: 23A – L1028
Current consumption: 25 mA
Operating frequency: 433.92 MHz
Security code combinations: 2
64
Modulation: AM/ASK AM/ASK
E.r.p.: 100 – 200 µW 100 - 200 µW
Range in open space: 150 – 250 m 150 - 250 m
Operating temperature: -10 ºC + 50ºC -10 °C - +50 °C
Dimensions: 81 x 46 x 16 81 x 46 x 16 mm
Weight: 40 g 40 g
Hereby, CDVI Wireless Spa, declares that the radio equipment type VR/TFxE is in compliance with
directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: www.gfa-elektromaten.co.uk
To Next Page
Need help?
General
