GFW CANYON OAK User Manual

Size: 119 x 39.5 x 70 cm (WDH)
Colours: Canyon Oak
Finish: Paper Veneer
CANYON OAK SIDEBOARD ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Canyon Oak Sideboard.
Please read the instructions carefully to ensure safe operation of this product.
Batch No. 221511
Page 1 of 14
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
Number of people
x2
1.5 Hour
Set Up

GFW CANYON OAK Specifications

General

Brand	GFW
Model	CANYON OAK
Category	Indoor Furnishing
Language	English

Summary

Tools and Preparation

Tools Required

Lists the necessary tools for assembling the Canyon Oak Sideboard.

Product Information and Safety

General Information

Key product details, assembly recommendations, and preparation.

Safety Warnings

Critical precautions for safe assembly and use, including choking hazards and weight limits.

Care Instructions

Guidelines for cleaning the sideboard without causing damage.

Parts and Fittings

Parts Identification

Visual list of all components with numerical labels for identification.

Fittings Identification

Comprehensive list of all hardware and fasteners with quantities and visual references.

General Hints and Tips

Advice on assembly techniques and proper use of fittings.

Assembly Steps

Step 1: Prepare Side Panels

Attaching runners and components to side panels.

Step 2: Assemble Base Structure

Connecting base panels and plinths.

Step 3: Attach Top Panel Supports

Securing horizontal supports to side panels.

Step 4: Connect Main Frame

Joining front and back uprights with cross rails.

Step 5: Attach Side Panels to Frame

Connecting side panels to the main structure.

Step 6: Install Internal Components

Fitting shelf supports and internal panels.

Step 7: Add Decorative Rails

Attaching front and side decorative rails.

Step 8: Mount Hinges

Mounting hinges onto doors and frame.

Step 9: Assemble and Install Drawers

Building and inserting drawers into the unit.

Step 10: Insert Adjustable Shelves

Placing adjustable shelves into designated slots.

Step 11: Mount Doors

Attaching the assembled doors to the unit.

Step 12: Adjust Doors

Fine-tuning door alignment and closure.

Step 13: Attach Top Panel

Securing the main top surface of the sideboard.

Assembly Completion

Final Checks and Maintenance

Verifying assembly, periodic checks, and instruction retention.