GGMgastro EBRH12 - User Manual

Questions and Answers

M
Michael PorterAug 7, 2025
Why is my GGMgastro EBRH12 Ice Maker not making ice even though the cycle is normal?
- L
  Lori HessAug 7, 2025
  If the ice making cycle of your GGMgastro Ice Maker appears normal, but no ice is being formed, it could be due to several reasons. The room temperature might be too high (it should be between 10-43 ?) or the water temperature in the inner tank could be too high (it should be between 8-32?). Also, there may be a refrigerant leak or a blockage in the cooling system pipe, which would require verification by a qualified technician.
J
John GuerraAug 14, 2025
What to do if the “Ice Full” indicator is on in my GGMgastro EBRH12?
- M
  Mike DavisAug 14, 2025
  If the “Ice Full” indicator is illuminated on your GGMgastro Ice Maker, it means the ice basket is full. Remove the ice from the basket. If you need to continue ice production despite the indicator, you can continuously press the “Select” button for 5 seconds to enable the unit to run 10 more cycles.
J
Jennifer MitchellAug 21, 2025
How to prevent ice cubes from sticking together in my GGMgastro Ice Maker?
- D
  David LopezAug 22, 2025
  If the ice cubes in your GGMgastro Ice Maker are sticking together, it could be because the ice making cycle is too long, or the water temperature in the inner tank is too low. To resolve this, stop the ice maker and restart it once the ice blocks have melted, and select the small size ice cube option. Also, replace the water in the tank, ensuring its temperature is between 8-32 ?.
E
Emma HendersonAug 29, 2025
What to do if the “Add Water” indicator is on in my GGMgastro EBRH12?
- N
  natashabutlerAug 29, 2025
  If the “Add Water” indicator is illuminated on your GGMgastro Ice Maker, it signifies a lack of water. To resolve this, stop the ice maker, add water, and then press the “ON/OFF” button again to restart the unit.

Summary

Important Safety Instructions

Preparing Your Ice Maker For Use

Getting To Know Your Unit

Unit Components Identification

Identifies key parts of the ice maker, including the scoop, basket, lid, and air outlet.

Control Panel Overview

Control Panel Functions and Indicators

Explains the purpose of each button and indicator (A-F) on the control panel.

Operating Procedures and Maintenance

Unpacking and Initial Setup

Steps for unpacking, cleaning, and preparing the ice maker for its first use.

Connecting the Ice Maker

Instructions for safely connecting the ice maker to a power outlet.

Cleaning and Maintenance

Guide on how to clean and maintain the ice maker for optimal performance.

Using Your Ice Maker

Ice Making Process

Steps for operating the ice maker, selecting ice size, and managing water levels.

Troubleshooting Common Issues

Identifies common problems and provides solutions for the ice maker.

Technical Parameters and Circuit Diagram

Explosive Drawings and Part Identification

Warranty Information

Correct Disposal of Product

Information on how to properly dispose of the product at the end of its life cycle.

GGMgastro EBRH12 Specifications

General

Product Type	Ice Maker
Ice Production	12 kg/24h
Connection value	0.15 kW
Voltage	230 V
Frequency	50 Hz
Material	Stainless steel
Water connection	Yes
Power Consumption	150 W