Ghibli & Wirbel FR30 Touch

Questions and Answers

M
martinwrightAug 3, 2025
What to do if my Ghibli & Wirbel FR30 Touch Floor Machine does not dry well and leaves water traces?
- A
  Ashley DavisAug 3, 2025
  If your Ghibli & Wirbel Floor Machine leaves traces of water, try these steps: * Ensure the aspirator is on. * Check and clean the aspiration tube connecting the squeegee to the recovery tank if it's blocked. * Clean the wiper and the dirty water filter. * Empty the recovery tank. * Replace or turn over the squeegee rubber blades if they are worn.
T
Tristan BakerAug 8, 2025
What to do if the aspirator on my Ghibli & Wirbel FR30 Touch Floor Machine isn't working?
- M
  Molly ScottAug 8, 2025
  If the aspirator on your Ghibli & Wirbel Floor Machine isn't working, consider the following: * Ensure the aspirator button is pressed. * If the recovery tank is full, empty, wash, and clean the tank and probes. * If the issue persists, the function card, display card, or intake motor might be damaged and need replacement.
M
Mr. Jason BrownAug 12, 2025
Why won't water come out of my Ghibli & Wirbel FR30 Touch Floor Machine?
- E
  Edgar SmithAug 12, 2025
  If no water is coming out of your Ghibli & Wirbel Floor Machine, check these: * Make sure the tank is filled. * Ensure the solenoid valve enabling switch is pressed and the tap is open. * Clean the filter if it's blocked. If none of these steps work, the solenoid valve may be faulty.
R
ricardo89Aug 18, 2025
Why is my Ghibli & Wirbel FR30 Touch Floor Machine not cleaning the floor sufficiently?
- K
  Kayla Lloyd DDSAug 18, 2025
  If your Ghibli & Wirbel Floor Machine isn't cleaning floors well enough, it might be due to unsuitable brushes or detergent for the floor type or dirt. Also, check if the brush is worn and needs replacement. Use brushes or detergents which are suitable for the type of floor or dirt to be cleaned.
C
Charles BerryAug 22, 2025
What to do if the display of my Ghibli & Wirbel Floor Machine does not turn on?
- R
  Ruth AndrewsAug 23, 2025
  If the display on your Ghibli & Wirbel Floor Machine doesn't turn on, check if the battery is charged. Also, replace the main 5A or 80A fuse if it's blown. Ensure the battery’s plug is correctly placed and not still in the charger’s outlet.
U
uturnerAug 27, 2025
What to do if the brush of my Ghibli & Wirbel FR30 Touch won't rotate?
- J
  John SmithAug 28, 2025
  If the brush on your Ghibli & Wirbel Floor Machine isn't rotating, first ensure the brush button is pressed. If it still doesn't rotate, the function card, display card, touch sensor on the handle, or brush motor may be damaged and need replacement.