Chapter 5 Parameters
VFD-E Series
Revision August 2006, 01EE, SW--PW V1.03/CTL V2.03 5-73
30 Control Board CPU WRITE failure (cF1.1)
31 Contrsol Board CPU READ failure (cF2.1)
32 ACI signal error (AErr)
33 Reserved
34 Motor PTC overheat protection (PtC1)
35-39 Reserved
40 Communication time-out error of control board and power board
(CP10)
In Pr.06.08 to Pr.06.12 the five most recent faults that occurred, are stored. After removing
the cause of the fault, use the reset command to reset the drive.
To Next Page