Emergency Power Down
Your adjustable bed frame comes with a power supply that, when powered with two new 9V batteries,
supports the emergency power down feature. If a power failure occurs while the head and/or foot
sections are raised, do the following:
STEP 1
Install two (2) new 9V batteries in the battery
compartment of the power supply.
STEP 2
Press the flat position on the remote if there is no
power from the electrical outlet.
STEP 3
Replace the two (2) 9V batteries after this procedure.
The 9V batteries (not included in the box) are for single
use only.
—11—
STEP 1
Wrap the bed legs (front & back) together tightly using
the bed leg straps.
Using the bed leg straps (Optional)
To help prevent bed separation when using two adjustable beds together, use the bed leg straps. (Optional for TXL
bases only)
STEP 2
Fasten the straps to prevent movement & maintain
stability.
To Next Page
Loading...