Attaching the bed legs
Remove the six (6) bed legs from the accessory box. Hand tighten the legs by threading them clockwise into the
pre-threaded holes on the bed frame.
Installing the retainer bar
STEP 1
Turn the bed frame over carefully, top side up.
STEP 2
Insert the ends of the retainer bar into the quick
connect brackets located at the foot of the bed.
—07—
Installa
NOTE: the legs are 3 pcs and can be separated and
attached to the base using 1, 2 or all 3 parts to achieve
different heights of the overall base.
To Next Page
Loading...