GHP Group Dyna-Glo EG10000DG - User Manual

GHP Group Dyna-Glo EG10000DG

48 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Before the rst use of this heater, please read this USER’S MANUAL

very carefully. This USER’S MANUAL has been designed to instruct

you as to the proper manner in which to assemble, maintain, store,

and most importantly, how to operate the heater in a safe and efcient

manner. Please keep this manual for future reference.

CONSUMER: Retain this manual for future reference.

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 877-447-4768 8:00 a.m. - 4:30 pm CST, Monday - Friday.

or email us at customerservice@ghpgroupinc.com

190703

Electric Garage Heater

INSTALLATION & MAINTENANCE INSTRUCTIONS

10,000W / 240V / 34,120 BTU

EG10000DG

Questions and Answers

E
Edwin EllisJul 29, 2025
Why does my GHP Group Electric Heater smell like it's burning?
- S
  Stacie DavisJul 29, 2025
  If your GHP Group Electric Heater is emitting a burning smell, it could be due to a few reasons. First, ensure the thermostat setting is higher than the current room temperature. Second, running the heater in a well-ventilated room can help dissipate any residual dust or oil debris from manufacturing. Third, remove any combustible materials within 0.9 meters (3 feet) of the heater. Finally, make sure that the garage heater is mounted at least 8 feet off the floor.
A
Amanda KellyAug 11, 2025
What to do if my GHP Group Electric Heater is not heating up?
- E
  elizabeth51Aug 11, 2025
  If your GHP Group Electric Heater is not heating, it could be due to the overheat protection being activated or a tripped breaker. Check that the air inlets and outlets are not blocked, as this can cause overheating. Switch off the circuit breaker for 30 minutes to allow the heater to cool down, then turn the power back on. Also, reset the breaker at the fuse panel and restart the heater.

Summary

Safety Information and Heater Placement

General Safety Precautions

Basic precautions for safe use of electrical appliances to prevent hazards.

Heater Placement Guidelines

Instructions for locating the heater away from traffic and obstructions.

Installation Procedures

Mounting the Bracket

Steps for securely attaching the mounting bracket to the ceiling joist.

Hanging the Heater

Procedure for lifting and securing the heater onto the mounting bracket.

Adjusting Air Flow Direction

How to direct the heater's airflow for optimal heat circulation.

Adjusting Louvers

Instructions on positioning the louvers for desired airflow.

Multiple Vertical Angles

How to tilt the heater for different vertical airflow angles.

Connecting the Power

Detailed wiring instructions for connecting the heater to the power supply.

Protecting the Heating Element

Proper procedures for turning the heater on and off to protect components.

Operating Instructions

Setting the Thermostat

How to adjust the thermostat for desired room temperature.

Selection Switch

Using the switch to control heating output (7500W or 10000W).

Thermal Cut-Out

Understanding the automatic shut-off mechanism and its indicators.

Adjusting Air Flow Direction (Operation)

Reiteration of adjusting airflow direction during operation.

Troubleshooting Guide

GHP Group Dyna-Glo EG10000DG Specifications

General

Brand	GHP Group
Model	Dyna-Glo EG10000DG
Category	Electric Heater
Language	English

Related product manuals

Preview: GHP Group Dyna-Glo EG10000DGP

GHP Group Dyna-Glo EG10000DGP

GHP Group Dyna-Glo EG7500DGP

Preview: GHP Group Dyna-Glo X Series

GHP Group Dyna-Glo X Series