2. Press >> key go to next network setting.
If you are using the network cable to connect the LAN, You can set up the network settings through Ethernet
submenu.
When you have the option DHCP on, it will automatically detect the correct IP address. DHCP OFF is used when
you want to use a certain IP address. In this case, you need to enter correct addresses in each field. In the end,
select the save option to confirm your settings.
The WIFI submenu is used when Spark2 Combo connect to network via a wireless connection.
Select WIFI submenu, a screen appears showing the search results for available WLANs, select the appropriate
To Next Page
Loading...