Gianni Ferrari Turboloader S322 User Manual

User Manual Turboloader
Page 1
©GF Gianni Ferrari Rev. 05
www.gianniferrari.com
USER MANUAL
Turboloader
S322 – S328 – M280 – H360 – H440 – H440-2S
English version translated from the original Italian version

Gianni Ferrari Turboloader S322 Specifications

General

Max Travel Speed	12 km/h
Hydraulic Flow	42 L/min
Engine Power	18.5 kW
Hydraulic Oil Tank Capacity	30 l
Bucket Capacity	0.22 m^3

Summary

Machine Identification

Customer Information and Usage

Operator Responsibilities

General Safety Regulations

Safety Devices

Safety Labels and Warnings

Technical Features

Load Diagram

Controls and Instruments

Pedals and Parking Brake

Explains the operation of the machine's pedals and parking brake.

Multifunction Joystick (M and H Series)

Series S Joysticks and Accelerator

Joystick Operation (S Series)

Accelerator Control

Control Panels

Main Control Panel

Identifies instruments and controls on the main dashboard.

Side Control Panel

Details controls located on the side panel of the machine.

Starting and Using the Machine

Starting the Engine

Step-by-step procedure for starting the machine's engine.

Stopping the Engine

Procedure for safely shutting down the machine's engine.

Moving the Machine

Telescopic Arm and Hydraulic Accessories

Telescopic Arm Control

Operation of the telescopic arm for different series.

Hydraulic Accessories Operation

Inspections and Maintenance

Battery and Hydraulic Oil

Hydraulic Oil Level and Maintenance

Hydraulic System Maintenance

Hydraulic Pressure System Control

How to check and maintain hydraulic system pressure.

Engine Maintenance

Air Precleaner and Air Filter Maintenance

Engine Filters and Oil Replacement

Diesel Filter Replacement

Engine Oil and Filter Replacement

Periodic Maintenance Schedule

Maintenance Intervals Table

Recommended Oils and Tire Pressures