EasyManua.ls Logo

Giant EnergyPak Plus - Specifications; Compatibility; Charging EnergyPak Plus; Safety, Storage and Transportation

Giant EnergyPak Plus
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EnergyPak Plus
INSTALLATION & USER MANUAL
2 / 8
2. SPECIFICATIONS
Type: Lithium-Ion
Voltage: 36 V
Capacity: 6620 mAh
Energy: 238 Wh
USB Port max. output: 5 V / 3 A
Dimensions: 5.6 mm * 99.9 mm * 87.4 mm
3. COMPATIBILITY
The EnergyPak Plus battery is compatible only with specific Giant or Liv bikes of model year 2020 or later.
These specific bikes are equipped with a 7 pin charge socket, an EnergyPak Smart battery and a frame with pre-drilled
holes for the EnergyPak Plus Mounting Kit. Always consult your local Giant dealer if more information and advice on
compatibility, installation and usage is needed.
4. CHARGING ENERGYPAK PLUS
The EnergyPak Plus will arrive from the factory in a hibernate state. It must be activated first, by connecting it to the
charger.
It is recommended to fully charge the EnergyPak Plus before the first use. To charge the EnergyPak Plus, use the original
Giant Smart Charger that was supplied with the bike and the adapter cable ( VII. ) provided in the mounting kit.
5. SAFETY, STORAGE AND TRANSPORTATION
The same rules regarding safety, storage and transportation that apply to your Giant or Liv E-bike and Energypak Smart,
also apply to the EnergyPak Plus. Please refer to your e-bike’s user manual and make sure you have read and understood
all information. If you don’t have access to your e-bike’s manual, ask your dealer for a paper copy or download a digital
copy of the e-bike user manual from the Giant or Liv website.
During charging, the led indicator on the EnergyPak plus will light up in a sequence from bottom to top. Each led
represents a section of 20% of the total capacity. When a section is full, the led will light up constant and remaining leds
will continue the sequence until all leds light up constant, indicating that the EnergyPak is then fully charged.
Charging time:
0 – 60%: 1:28 h
0 – 100%: 3:25 h
Weight: 1.8 kg
Operating temp. (charge): -20° C ~ 45° C
Operating temp. (discharge): -20° C ~ 60° C
Storage temp. (short term): -20° C ~ 40° C (< 3 months)
Storage temp. (long term): -20° C ~ 20° C (> 3 months)

Related product manuals