Need help?Do you have a question about the Giant Momentum and is the answer not in the manual?
General| Frame | ALUXX-Grade Aluminum |
|---|---|
| Wheelset | Giant Alloy |
| Front Derailleur | Shimano Tourney |
| Brakes | Alloy Linear Pull |
| Chain | KMC |
| Saddle | Comfort |
| Handlebar | Alloy |
| Stem | Alloy |
| Seatpost | Alloy |
| Pedals | Platform |
Introduction to the E-bike and brand.
Guidance on how to read and understand the manual.
Information on where to get help and maintenance.
Critical safety precautions for the battery and charger.
Guidelines for using the luggage carrier securely.
Advice for initial use and safe riding practices.
Precautions for transporting the bike and battery.
Safety considerations for using trailers and child seats.
General introduction to the e-bike's electric components.
Details about the integrated lithium-ion battery packs.
Information on the Yamaha-powered motor and its features.
Overview of the handlebar-mounted controls and indicators.
Visual guide and identification of EnergyPak components and chargers.
Important safety and handling notes for the EnergyPak.
Steps to activate a new EnergyPak from its hibernate state.
Detailed instructions for charging via 4A and Smart chargers.
How to charge integrated and side-release EnergyPaks while on the bike.
Instructions for charging the rear rack mounted EnergyPak.
Step-by-step guide to remove integrated and Torx-locked EnergyPaks.
How to remove, charge, and install the Smart 375 EnergyPak.
Steps to remove the side release type EnergyPak.
Instructions for installing the rear rack mounted EnergyPak.
How the EnergyPak behaves at low power levels and usage tips.
Tables showing charging times for different capacities and chargers.
Recommendations for storing the EnergyPak for long periods.
Explanation of how the SyncDrive motor provides assistance.
Introduction to the RideControl ONE and Remote Controller interfaces.
Details on the EVO and Charge displays, their indications and settings.
How to power the system on/off and adjust power assist levels.
How to use the walk assist function for pushing the bike.
How to control bike lights and LCD screen backlight.
Specifics on integrated lighting systems and their controls.
How battery levels are shown on different displays.
How to cycle through various data displays on the system.
How to reset trip distance, time, and average speed.
How to change between metric and imperial units.
How to adjust the angle of the displays for optimal viewing.
How to adjust the angle of the remote control and RideControl One.
Proper cleaning and care for the e-bike.
Information about the bike keys and their importance.
Factors affecting the e-bike's riding range on a single charge.
Advice on optimal gear shifting for range and performance.
How to check and adjust chain tension, and information on belt drives.
What event notifications mean and how to address them.
Specific error messages and their interpretation for EVO displays.
Error messages and their interpretation for Charge displays.
How events are indicated on the RideControl ONE display.
Common questions about display rotation, upgrades, and behavior.
Answers to common questions about EnergyPak capacity, interchangeability, and charging.
Questions about motor assistance, noise, and play.
Answers to questions about QR codes, cleaning, lighting, and range differences.
Details on the warranty period, coverage, and limitations for the E-bike.
Conditions and parts not covered by the warranty.
Compliance with standards and advice against tampering.
FCC rules and regulations regarding the device's radio frequency emissions.
Compliance with Industry Canada's regulations for radio frequency exposure.
To Next Page