EN
Icon Description
No Signal (not fixed)
Weak Signal (fixed)
Bike 1-7
Strong Signal (fixed)
Log Record in Progress
Cadence Sensor
active / inactive
Speed Sensor
active / inactive
Power Status
Heart Rate Sensor
active / inactive
Recording is paused
Current speed is faster/
slower than average speed
/
4
5
3
2
1
Power Sensor
active / inactive
Di2 Sensor Active
Combo Sensor
active / inactive
•
•
•
4
PAGE ( )
In free cycling mode, long press to return
to Main Menu.
In Meter view, press to switch meter
In Menu, press to move down to scroll
through menu options.
•
When recording, long press to enter into
Shortcut Menu.
screen page.
•
•
1
BACK ( )
Press to return to the previous page or
cancel an operation.
When recording, press to pause recording.
Press it again to stop recording.
( )
•
•
•
2
LAP/OK
In Menu, press to enter or confirm a
selection.
When recording, press to mark the lap.
In free cycling*, press to start recording.
5
•
•
UP ( )
In Meter view, press to switch
meter screen page.
In Menu, press to move up to
scroll through menu options.
( )
•
•
•
3
ON/OFF
Press and hold to turn the device off.
Press to turn the device on.
Press to turn on/off backlight.
* Free cycling is a mode with no recording. neostrack syncs with the movement of bicycles.
It starts when you start pedaling, allowing you to view real time data without recording.
1
To Next Page
Need help?
General
