Giant TURBO LASER User Manual

Turbo Nozzle
04/21 23000.INDD
Model # Nozzle Size Repair Kits*
23000-020 2.0 09620-020
23000-025 2.5 09620-025
23000-030 3.0 09620-030
23000-035 3.5 09620-035
23000-040 4.0 09620-040
23000-045 4.5 09620-045
23000-050 5.0 09620-050
23000-055 5.5 09620-055
23000-060 6.0 09620-060
*Repair kits include items 2-12
MAINTENANCE NOTICE:
If turbo will not spin, take unit apart and clean the nozzle. If turbo still will not spin, have an authorized distributor repair nozzle.
Operating Conditions
Maximum Flow: 22.0 GPM (83 L/min)
Maximum Pressure: 3600 PSI (248 bar)
Maximum Temperature: 195 °F (90 °C)
Spray: 20°
Weight: 1.4 lbs. (0.64 g)
Connection: 1/4" FBSP
+
+
To convert from BSP to NPT threads order part numbers 06581
(1/4" MBSP x 1/4" FNPT) or 06581M (1/4" MBSPx1/4" MNPT)
*
WARNING
*
HIGH PRESSURE
DO NOT POINT
AT INDIVIDUAL
MAY CAUSE
SERIOUS INJURY!
Giant Industries, Inc.
900 N. Westwood Ave.
Toledo, Ohio 43607
PHONE: 419-531-4600
FAX: 419-531-6836
www.giantpumps.com
© Copyright 2021 Giant Industries, Inc.
Series
23000
WARNING: This product might contain a chemical known
to the State of California to cause cancer, and birth
defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov

Giant TURBO LASER Specifications

General

Brand	Giant
Model	TURBO LASER
Category	Industrial Equipment
Language	English

Summary

Turbo Nozzle Series 23000 Product Details

Model and Nozzle Specifications

Lists available model numbers and their corresponding nozzle sizes for the Turbo Nozzle.

Repair Kit Information

Details the part numbers for the specific repair kits available for the nozzle.

Operating Conditions and Specifications

Outlines maximum flow, pressure, temperature, spray characteristics, weight, and connection type.

Maintenance and Troubleshooting Advisory

Provides essential notice regarding nozzle spin issues and basic repair guidance.

Turbo Laser Repair Instructions

Step-by-Step Disassembly and Reassembly

Detailed instructions for disassembling, replacing components, and reassembling the Turbo Laser nozzle.