5
How to fill sealant into Giant Tubeless Ready
WheelSystem:
Step1：Remove valve core from valve body by using the provided tool. (Fig. 4)
Step2：Shake the bottle well to divide particles well in the liquid. (Fig.5)
Step3：Fill sealant through the open valve body. The suggested volume is
(depending on tire size) 30~60 ml per wheel. (Fig. 6)
Step4：Reinstall valve core to valve body by using the provided tool. Ensure the valve core
and lock ring are firmly tightened. (Fig. 7)
Step5：Re-inflate the tire to the lowest maximum tire pressure. (Fig. 8)
Step6：Gently shake and spin the WheelSystem to spread the sealant well inside the inner case
of tire and cover the entire inner surface to achieve the best performance. (Fig. 9)
Step7：Assemble the WheelSystem, inflate the tire to recommended riding pressure, close the
valve and go for a ride.
To Next Page
Loading...
