Gibertini EUROPE Series

Need help?

Do you have a question about the Gibertini EUROPE Series and is the answer not in the manual?

Summary

SAFETY INSTRUCTIONS

INSTALLATION AND START-UP

Covers installation and initial setup of the system components.

MAINTENANCE

Outlines procedures for maintaining the ATEX instruments.

INSTRUCTION TO AVOID MACHANICAL RISKS

Guidance on preventing mechanical risks to avoid ignition in explosive atmospheres.

INSTALLATION PLAN

Details the plan for installing instruments in hazardous and safe areas.

HOW TO INSTALL

EUROPE; EURO-PAINTEX MODEL

Installation steps specific to EUROPE/EURO-PAINTEX models.

TMB MODELS UNTIL 300 kg

Installation instructions for TMB models up to 300 kg.

TMB MODELS FROM 600 TO 3000 kg

Installation procedure for TMB models ranging from 600 to 3000 kg.

BALANCE DESCRIPTION

EUROPE MODEL

Detailed description and assembly view of the EUROPE model balance.

EURO-PAINTEX MODEL

Description and assembly view of the EURO-PAINTEX model balance.

TMB MODELS

Description and assembly view of the TMB models balance.

CALIBRATION MASSES TABLE

Tables of calibration masses for EUROPE EX balances and EUROPE EX platforms.

HOW TO INSTALL THE PLATFORM INTO THE CAVITY (pan at floor level)

OPERATING INSTRUCTIONS

GENERAL CONSIDERATIONS

General guidelines for placing and operating the balance.

TARE KEY

Explanation and use of the TARE key for zeroing values.

BAR GRAPH

Description of the bar graph display for capacity percentage.

CALIBRATION (MODE KEY)

Procedure for calibrating the instrument using the MODE key.

DISPLAY MESSAGES

Explanation of various messages displayed by the instrument.

COMMUNICATION TO HOST COMPUTER

GENERAL CONSIDERATIONS

Overview of communication methods between the instrument and a host computer.

FORMATS

Details the data formats for communication with a host computer.

COMMAND OF TICKET PRINT

Instructions and commands for printing tickets from the instrument.

SERIAL COMMANDS FOR THE USE OF BALANCE AS A TERMINAL

Commands for using the balance as a terminal for data input/output.

TABLE OF THE SERIAL COMMANDS

TABLE OF AVAILABLE COMMANDS

Lists and explains available serial commands for the instrument.

ASCII TABLE OF RECOGNIZED CODES (EXADECIMAL VALUE)

ASCII character codes recognized by the instrument for communication.

DISPLAYING INTERNAL;EXTERNAL AND FLASHING MESSAGE

Explains how messages are displayed internally and externally.

DISABLING KEYBOARD AND SEND KEYS TO SERIAL LINE

Procedures for disabling the keyboard and sending key presses to the serial line.

WORKING PARAMETERS

Parameter 0 (baud rate, transmission type)

Configuration of baud rate and data transmission type.

Parameter 1 (parity, Bit;char, stop bit)

Configuration of parity, bit/char, and stop bit settings.

Parameter 2 (up to 65000 reading counts)

Settings for conversion rates for up to 65000 reading counts.

Parameter 2 (more than 65000 reading counts)

Settings for conversion rates for more than 65000 reading counts.

Parameter 3 (brightness, steadiness, language, Error 23)

Configuration for display brightness, steadiness, language, and error indication.

Parameter 4 (display type)

Settings for different display types.

Parameter 5 (Average)

Configuration for averaging readings.

Parameter 6 (zero-tracking)

Settings for zero-tracking functionality.

INTERCONNECTIONS (ON REQUEST)