EasyManua.ls Logo

Gibraltar Mailboxes Gentry User Manual

Gibraltar Mailboxes Gentry
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
# 876
CUSTOMERS ARE REQUIRED TO CONTACT THE LOCAL POST OFFICE BEFORE INSTALLING THE MAILBOX TO ENSURE ITS CORRECT PLACEMENT AND
HEIGHT AT THE STREET. GENERALLY, MAILBOXES ARE INSTALLED AT A HEIGHT OF 41-45 INCHES
FROM THE ROAD SURFACE TO EITHER THE INSIDE
SURFACE OF THE MAILBOX THAT THE MAIL IS PLACED ON BY THE CARRIER OR TO THE LOWEST EDGE OF MAIL ENTRY (FOR LOCKED MAIL SLOT
DESIGNS) AND ARE SET BACK 6-8 INCHES FROM THE FRONT FACE OF CURB OR ROAD EDGE TO THE MAILBOX DOOR.
LOS CLIENTES DEBEN COMUNICARSE CON LA OFICINA LOCAL DE CORREOS ANTES DE INSTALAR EL BUZÓN PARA ASEGURARSE DE QUE SU
COLOCACIÓN Y LA ALTURA EN LA CALLE SEAN LAS CORRECTAS. POR LO GENERAL, LOS BUZONES SE INSTALAN A UNA ALTURA DE 104 A 114 CM
DESDE EL PAVIMENTO HASTA LA SUPERFICIE INTERIOR DEL BUZÓN DONDE EL CARTERO COLOCA EL CORREO O HASTA EL BORDE MÁS INFERIOR
DE LA ABERTURA PARA EL CORREO (PARA DISEÑOS DE BUZÓN DE RANURA CON CERRADURA) Y SE ENCUENTRAN A UNA DISTANCIA DE 15 A 20 CM
HACIA ATRÁS DESDE LA SUPERFICIE DE LA ORILLA QUE DA A LA CALLE O DEL BORDE DEL CAMINO HASTA LA PUERTA DEL BUZÓN.
Question and Answer IconNeed help?

Do you have a question about the Gibraltar Mailboxes Gentry and is the answer not in the manual?

Gibraltar Mailboxes Gentry Specifications

General IconGeneral
Product TypeMailbox
MaterialSteel
Mailbox SizeLarge
ColorBlack
Lock TypeNon-Locking
Weather ResistanceYes
Mounting TypePost Mount
FinishPowder Coated

Summary

Important Pre-Installation Information

Safety Warning: Underground Cables

Check for underground cables or pipes before installation.

Local Post Office Requirements

Contact local post office for correct placement and height guidelines.

Recommended Tools and Supplies

Mailbox Assembly Steps

Step 1: Prepare Mailbox and Wrap

Turn mailbox upside down, place on cloth, align parts, and insert screws.

Step 2a: Attach Mailbox Body to Floor

Line up mailbox body inside floor guides and secure with screws.

Step 2b: Insert Mailbox Doors

Align hinge, slide, and pop the other hinge into place.

Step 3: Attach Newspaper Wrap to Post

Slide newspaper wrap onto post until it snaps, then attach with a screw.

Step 4: Mount Mailbox Unit to Post

Align post tabs with mailbox bottom slots and slide until it snaps.

Step 5: Attach Newspaper Door

Align hinge in slot, slide other hinge until it pops into place.

Step 6: Install 4x4 Post

Slide post over 4x4 and attach securely with screws.

Warranty Information

Related product manuals