Function 4 Parametric EQ status: Sets up PEQ status Default = 1
Value Result Clickstream
0 PEQ never switches on automatically and must be switched on manually 4 § 0 §
1 On startup, switches on PEQ automatically 4 § 1 §
Note: When set to 0, you have to turn on PEQ manually by clicking on the Peg LED in Chameleon mode
Function 5 Coil switching status: Sets up your coil switching behavior Default = 1
Value Result Clickstream
0 On startup, switches coils to Gibson Classic mode regardless of any previous settings 5 § 0 §
1 On startup, switches coils to your last selected Chameleon mode sound 5 § 1 §
Function 6 Coil preset: Sets up coil switching behavior when you select a tuning preset Default = 1
Value Result Clickstream
0 Coil setting will not be changed when you select a tuning preset 6 § 0 §
1 Switches coils to the sound that was stored with the selected preset 6 § 1 §
Function 7 Tuning precision: Sets up tuning precision and performance Default = 5
Value Result Clickstream
0 to 9 Trades off tuning speed for accuracy. 0 = least accurate, 9 = most accurate 7 § 0-9 §
Note: 0 gives fastest tuning with 2.5 cent accuracy, 9 gives slowest tuning with 0.2 cent accuracy
Function 9 E-Function correction: Compensates for different strum levels when tuning Default = 1
Value Result Clickstream
0 Switches off compensation to give an extremely slight speed increase when tuning 9 § 0 §
1 Switches compensation on to allow a wider variation in strum levels 9 § 1 §
Note: When set to 0, you need to strum the strings gently during tuning
Function 10 Calibration: Sets global calibration for all presets Default = 440.0
Value Result Clickstream
4440 Sets A = 440.0 Hz as calibration standard 13 § 4§4§0§0 §
xxxx “xxxx” can be a value from 4300 (430Hz) to 4499 (449.9Hz) 13 § x§x§x§x §
Note: Resolution is 0.1Hz so you need to enter four numbers
Function 13 Tutorial mode: Shows a sound's name in Chameleon Mode Default = 1
Value Result Clickstream
0 No sound name spelled out when selected in Chameleon mode 13 § 0 §
1 Shows a sound's name when selected in Chameleon mode 13 § 1 §
Note: When you select a Chameleon sound preset, Dark Fire normally spells it out but you can turn this behavior off.
Gibson Dark Fire 4.0 manual, page 29
To Next Page
Loading...
