Function 101 Reset tuning config data: Resets to standard tuning, default precision, etc.
Result Clickstream
Step 1 Do the clickstream on the right, then rotate the MCK fully counter-clockwise 101 §
Step 2 Press the Display Matrix momentarily, then wait for the red “?” to appear
Step 3 Rotate MCK to the blue “Y” (“Yes”), then press the Display Matrix momentarily
Step 4 Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily
Step 5 Push the MCK back in, and the system has been reset.
Note: If you change your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”
Function 103 Reset presets: Resets all tunings to factory defaults
Result Clickstream
Step 1 Do the clickstream on the right, then rotate the MCK fully counter-clockwise 103 §
Step 2 Press the Display Matrix momentarily, then wait for the red “?” to appear
Step 3 Rotate MCK to the blue “Y” (“Yes”), then press the Display Matrix momentarily
Step 4 Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily
Step 5 Push the MCK back in, and the tuning presets have been reset
Note: If you change your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”
Function 105 Reset modifier: Resets runtime correction and calibration data
Result Clickstream
Step 1 Do the clickstream on the right, then rotate the MCK fully counter-clockwise 105 §
Step 2 Press the Display Matrix momentarily, then wait for the red “?” to appear
Step 3 Rotate MCK to the blue “Y” (“Yes”), then press the Display Matrix momentarily
Step 4 Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily
Step 5 Push the MCK back in, and the runtime correction/calibration data has been reset
Note: If you change your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”
Function 106 Reset neck configuration: Resets Powerheads' speed and acceleration
Result Clickstream
Step 1 Do the clickstream on the right, then rotate the MCK fully counter-clockwise 106 §
Step 2 Press the Display Matrix momentarily, then wait for the red “?” to appear
Step 3 Rotate MCK to the blue “Y” (“Yes”), then press the Display Matrix momentarily
Step 4 Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily
Step 5 Push the MCK back in, and the Powerhead speed/accleration data has been reset
Note: If you change your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”
Gibson Dark Fire 4.0 manual, page 31
To Next Page
Loading...
