Need help?Do you have a question about the Gibson Electric Guitar and is the answer not in the manual?
General| Neck Material | Mahogany |
|---|---|
| Number of Frets | 22 |
| Body Material | Mahogany |
| Fingerboard Material | Rosewood |
| Pickup Configuration | HH |
| Bridge | Tune-O-Matic |
| Scale Length | 24.75 inches |
| Tuners | Grover Rotomatics |
Describes the construction material and characteristics of the guitar's body.
Details the materials and construction of the guitar's neck and headstock.
Explains different types of pickups used, including humbucking and P-90.
Covers the standard electronic configuration, knobs, and selector switches.
Explains the bridge's adjustability for height, string length, and intonation.
Describes the function and adjustment of the stopbar tailpiece.
Discusses the importance and care of the guitar's finish.
Provides advice on protecting the guitar during travel and use.
Details conditions and actions that can damage the guitar.
Covers string maintenance, changing frequency, and quality.
Provides step-by-step instructions for properly installing guitar strings.
Explains the impact of string gauge on playability and tone.
Recommends Gibson strings and discusses their quality.
Introduces the Gibson Robot Guitar and its auto-tuning technology.
Explains the functions and operation of the Master Control Knob.
Lists important safety warnings and precautions for using the Robot Guitar.
Details how to use the instant tuning feature.
Explains the process for standard tuning operations.
Guides through tuning the guitar to E major.
Provides instructions for DADGAD tuning mode.
Guides on how to perform Dropped D tuning.
Explains the steps for Delta Blues tuning.
Details the procedure for E Flat tuning.
Covers the process for Double Dropped D tuning.
Explains how to set a reference pitch for tuning.
Guides on creating and saving custom tuning configurations.
Explains how to use the mode for winding strings up.
Details the procedure for winding strings down.
Provides instructions for restringing the Robot Guitar.
Guides on activating string up mode for a single string replacement.
Explains how to perform intonation adjustments on Gibson models.
Details the process for calibrating the guitar's tuning system.
Describes how to access and enter the setup mode.
Explains how to reset the guitar's settings to factory defaults.
Shows how to check the guitar's software version.
Sets the last used tuning to activate on startup.
Sets a preset tuning to activate on startup.
Adjusts the tuning speed and accuracy of the system.
Enables or disables Dynamic Runtime Control for tuning.
Manages the eFunction correction feature for tuning.
Provides steps for manually calibrating the Powerheads.
Indicates how to check the battery charge level.
Details the process for charging the guitar's battery.
Explains the emergency charging procedure for the battery.
Describes the system's automatic power-off features.
Alerts users to potential short circuit issues and their indicators.
To Next Page
