Turn the switch to the “OFF“ (O) position.
Slide on and open the top cover.
The kill chamber is now ready for cleaning. Use a soft bristle brush
and warm soapy water to scrub inside of the kill chamber if desired.
Thoroughly dry interior and exterior of the kill chamber.
Slide on and close the top cover. Turn the switch to the “ON“ (-) position.
Trap is ready for use.
PLEASE READ AND FOLLOW ALL INSTRUCTIONS, INCLUDING WARNINGS
AND IMPORTANT PROFESSIONAL TIPS, BEFORE USING THE TRAP.
USE THE MANUAL SHOCK BUTTON
TO DISPOSE OF THE RODENT
TRAP CLEANING INSTUCTIONS
If you notice that the mouse is not killed yet, you can use this button to shock
it again. Press the button 3 times quickly to start. The trap will work to ensure
that the mouse is 100% killed.
Turn the switch to the “OFF“ (O). Slide off the top cover and properly discard
the mouse.
SPECIFICATIONS
TIPS:
Input Voltage DC 5V
Rated Power 5W
High Voltage 8000-10000V
Battery Type Built-in lithium rechargeable battery
Capacity 2000mAh
x
2
The Umba Group
1825 Swarthmore Ave.
Suite D
Lakewood, NJ 08701
732-730-9195
It needs to be charged for the fi rst time.
It takes 3 hours for the battery to be fully charged.
Use 5V / 1A power supply.
Made in china
1. 2. 3. 4.
1.
2.
3.
4.
www.umbagroup.com
G870-product-manual-5in-x-8in.indd 2G870-product-manual-5in-x-8in.indd 2 15/12/2021 21:25:3115/12/2021 21:25:31
To Previous Page
Loading...