1-3 Installing the CPU
• Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest
• Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.
• Apply an even and thin layer of thermal grease on the surface of the CPU.
•
of the CPU may occur.
•
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
card, memory, hard drive, etc.
Installing the CPU
AM4 Socket
A Small Triangle
One of the Socket
AM4 CPU
A Small Triangle
Pin One
1-4 Installing the Memory
Channel memory mode will double the original memory bandwidth.
following:
• Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
• Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
• Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
1.
2.
the same capacity, brand, speed, and chips be used.
Please visit GIGABYTE's website for details on hardware installation.
- 9 -
To Next Page
Loading...
