Gigabyte E152-ZE0 - Page 92

BIOS Setup - 92 -
5-3-3-1-1 DRAM Controller Conguration
Parameter Description
DRAM Controller Conguration
DRAM Power Options
Press [Enter] to congure DRAM Power OptionsMa.

Power Down Enable
– Enable/Disable DDR power down mode.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

Power Down Entry Delay

SubUrgRefLowerBound

UrgRefLimit

DRAM Maximum Activate Count
– Options available: Auto, Unlimited MC, 200K,300K, 400K, 500K,
600K, 700K. Default setting is Auto.

DRAM Refresh Rate
– Options available: 7.8 usec, 3.9 usec. Default setting is 7.8 usec.

Self-Refresh Exit Staggering
– Options available:Disabled, Trfc/3, Trfc/4. Default setting is
Disabled.
Cmd2T
Selects the Cmd2T mode on ADDR/CMD.
Options available: Auto, 1T, 2T. Default setting is Auto.
Gear Down Mode
Enable/Disable the Gear Down Mode function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.