Gigabyte G292 - User Manual

How To Install a Server into a Tank
G292
@GIGABYTESERVER GIGABYTE GIGABYTEChannelgigabyteserver
Installing Server
2
1
1
Installati on
1 Attach the two carabiners to server handles.
2 Put the server into the tank vertically.
 Strongly recommended to use gloves when handling the coolant.
 Before handling coolant, handlers must read the material safety data sheet (MSDS) for their safety.
 The thermal pad contains Indium foil, so it is strongly recommended to use gloves
when replacing the thermal pad.
DANGER!
CAUTION!
 Make sure the crane can handle at least 60 KG before installing the server into a tank.
 Only licensed professionals are authorized to access the restricted access location.
 The power supply fan is disabled by default, so the server must be immersed in the fluid before powering on.
 Consult with immersion cooling tank vendor to ensure compatibility and read their tank manual thoroughly.

Summary

Installing Server

Server Installation Cautions

Ensure crane capacity (60 KG), use licensed professionals, and note power supply fan status before immersion.

Coolant and Thermal Pad Safety

Use gloves for coolant and thermal pads containing Indium foil; consult MSDS before handling coolant.

Installing Optional Handles

Installing Thermal Pad to CPU

CPU Thermal Pad Handling Safety

Strongly recommended to use gloves and mask when handling thermal pads containing Indium foil.

Gigabyte G292 Specifications

General

Brand	Gigabyte
Model	G292
Category	Server
Language	English