- 28 -
2-6 Power Management
& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& HPET Timer
(Note)
Enables or disables High Precision Event Timer (HPET) for Windows 8/7 operating system. (Default:
Enabled)
& Audio LED
Enables or disables the onboard audio LED. (Default: Enabled)
(Note) Supported on Windows 8/7 operating system only.
` ATA Port Information
This section provides information on the device connected to each SATA port controlled by AMD Chipset.
` SATAConguration
& PORT0HotPlug~PORT7HotPlug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& SATAPoweronPORT0~SATAPoweronPORT7
Enables or disables each SATA port. (Default: Enabled)
` SuperIOConguration
This section provides information on the super I/O chip and allows you to congure the serial port.
& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)