Gigabyte G242-Z11 - Page 13

- 13 - Hardware Installation
(G242-Z11) 4 x PCIe x16 slots (Gen4 x16 bus) for GPUs
Riser Card CRSG120:
 1 x PCIe x16 slot (Gen4 x16 or x8 bus), Low prole, half-length
 1 x PCIe x8 slots (Gen4 x0 or x8 bus), Low prole, half-length
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth
- System is validated for population with a uniform GPU model
- Support is not provided for mixed GPU populations
Video  Integrated in Aspeed® AST2500
 2D Video Graphic Adapter with PCIe bus interface
 1920x1200@60Hz 32bpp, DDR4 SDRAM
Storage  Front side: 4 x 3.5" SATA hot-swappable HDD/SSD bays
 2.5" HDD/SSD supported
 SATA devices supported only
 Rear side: 2 x 2.5" NVMe/SAS/SATA hybrid hot-swappable HDD/SSD bays
 SAS card is required for SAS devices support
SAS Depend on SAS Card
Internal I/O  1 x TPM header
 1 x Front panel header
Front I/O  1 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 1 x System status LED
 1 x HDD activity LED
 2 x LAN activity LEDs
Rear I/O
(G242-Z10)
 2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID LED
(G242-Z11)  2 x USB 3.0
 1 x VGA
 1 x MLAN
 1 x ID LED
Backplane I/O  Front side_CBPG041: 4 x SATA/SAS ports
 Rear side_CBP2021: 2 x NVMe/SATA/SAS ports
 Speed and bandwidth: SATA 6Gb/s, SAS 12Gb/s or PCIe x4 per port