- 35 -
System Hardware Installation
Follow these instructions to install a 2.5" hard disk drive into 3.5" HDD tray:
1. Press the release button.
2. Extend the locking lever.
3. Pull the locking lever in the direction indicated to remove the HDD tray.
4. Align the hard disk drive with the positioning stub on the HDD tray.
5. Secure the hard disk drive with ve screws.
6. Reinsert the HDD tray into the slot and close the locking lever.
7. Reinsert the HDD tray into the slot and close the locking lever.
Pull
Press
2
1
4
To Next Page
Loading...
