Gigabyte G292-Z20 - Page 13

- 13 - Hardware Installation
Storage 8 x 2.5" hot-swappable HDD/SSD bays
 2 x amber HDD trays compatible with Gen3 U.2 devices
 6 x blue HDD trays compatible with SATA/SAS devices only
SAS card is required for SAS devices support
Recommended 12Gb/s SAS cards:
 CRA4448
 CRA4548
1 x M.2 slot:
 M-key
 PCIe Gen3 x4
 Supports NGFF-2242/2260/2280/22110 cards
1 x M.2 slot:
 M-key
 PCIe Gen3 x2
 Supports NGFF-2242/2260/2280/22110 cards
SAS  Supported via add-on SAS Card
RAID  Depends on SAS Card
Expansion Slot
(G292-Z20)
• 8 x PCIe x16 slots (Gen4 x16 bus) for GPUs (Microchip solution)
• 2 x PCIe x16 (Gen4 x16 bus) Half-length low-prole slots
1 x M.2 slot:
• M-key
• PCIe Gen3 x4
• Supports NGFF-2242/2260/2280/22110 cards
1 x M.2 slot:
• M-key
• PCIe Gen3 x2
• Supports NGFF-2242/2260/2280/22110 cards
- Maximum limitation of GPU card: 285mm (L) x 111.5mm (W) x 39.5mm (H)
- System is validated for population with a uniform GPU model
- Support is not provided for mixed GPU populations
- For the latest GPU cards QVL, please contact your GIGABYTE representative