Gigabyte G292-Z40 - Page 13

- 13 - Hardware Installation
Storage  8 x 2.5" hot-swappable HDD/SSD bays
 SAS card is required for SAS devices support
Recommended 12Gb/s SAS cards:
 CRA4448
 CRA4548
SATA  1 x 7-pin SATA III 6Gb/s with SATA DOM supported
 By using pin_8 or external cable for power function
SAS
 Supported via add-on SAS Card
Internal I/O  1 x TPM header
 1 x Serial header
 1 x Buzzer
Front I/O  1 x Power button with LED
 1 x ID button with LED
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
 1 x Reset button
Rear I/O  2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 1 x System status LED
Backplane I/O  8 x SAS/SATA ports
 Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
 SAS card is required for SAS devices support
TPM  1 x TPM header with SPI interface
 TPM2.0 kit: CTM010