Gigabyte G292-Z43 Manual

How To Install a Server into a Tank
G292
@GIGABYTESERVER GIGABYTE GIGABYTEChannelgigabyteserver
Installing Server
2
1
1
Installati on
1 Attach the two carabiners to server handles.
2 Put the server into the tank vertically.
 Strongly recommended to use gloves when handling the coolant.
 Before handling coolant, handlers must read the material safety data sheet (MSDS) for their safety.
 The thermal pad contains Indium foil, so it is strongly recommended to use gloves
when replacing the thermal pad.
DANGER!
CAUTION!
 Make sure the crane can handle at least 60 KG before installing the server into a tank.
 Only licensed professionals are authorized to access the restricted access location.
 The power supply fan is disabled by default, so the server must be immersed in the fluid before powering on.
 Consult with immersion cooling tank vendor to ensure compatibility and read their tank manual thoroughly.

Gigabyte G292-Z43 Specifications

General

Form Factor	2U
CPU Socket	Socket SP3
Maximum Memory	8TB
SATA	Yes
Chipset	System on Chip (SoC)
Processor Support	Dual AMD EPYC 7003 Series Processors
Memory Slots	32 x DIMM slots
Memory Type	DDR4
Storage Support	Up to 24x 2.5" or 12x 3.5" drives
SAS	Yes (with optional controller)
M.2 Slots	2 x M.2 slots (PCIe Gen4 x4)
Management	IPMI 2.0