Gigabyte G492-HA0 - Intel Optane DCPMM DIMM Population Rule

System Hardware Installation - 36 -
3-9-5 Intel Optane DCPMM DIMM Population Rule
Thermal conditions for DCPMM DIMM support:
• The ambient temperature must be at or below 35°C
• The 3rd Generation Intel® Xeon® Scalable Processors used must have a maximum TDP of 220W
• A maximum of 16 pcs 512G DCPMM may be installed
• RDIMM / DCPMM must be installed into CPU0 memory rst
• You must install one RDIMM into any slot #0 of CPU0 before installing the DCPMM.
(e.g. A0/B0/C0/D0/E0/F0/G0/H0/I0/J0/K0/L0/M0/N0/O0/P0)
• The DCPMM must be installed into the DIMM slot #1 next to the corresponding RDIMM
in slot #0 (e.g. if RDIMM is installed into DIMM slot A0, the DCPMM must be installed into
DIMM slot A1)
22
K1
/
Intel Optane DCPMM Slot
K0
/RDIMM Slot
L1
/
Intel Optane DCPMM Slot
L0
/RDIMM Slot
I1
/
Intel Optane DCPMM Slot
I0
/RDIMM Slot
J1
/
Intel Optane DCPMM Slot
J0
/RDIMM Slot
N0
/RDIMM Slot
N1
/
Intel Optane DCPMM Slot
M0
/RDIMM Slot
M1
/
Intel Optane DCPMM Slot
P0
/RDIMM Slot
P1
/
Intel Optane DCPMM Slot
O0
/RDIMM Slot
O1
/
Intel Optane DCPMM Slot
C1
/
Intel Optane DCPMM Slot
C0
/RDIMM Slot
D1
/
Intel Optane DCPMM Slot
D0
/RDIMM Slot
A1
/
Intel Optane DCPMM Slot
A0
/RDIMM Slot
B1
/
Intel Optane DCPMM Slot
B0
/RDIMM Slot
F0
/RDIMM Slot
F1/
Intel Optane DCPMM Slot
E0
/RDIMM Slot
E1
/
Intel Optane DCPMM Slot
H0
/RDIMM Slot
H1
/
Intel Optane DCPMM Slot
G0
/RDIMM Slot
G1
/
Intel Optane DCPMM Slot
CPU0
CPU1