4
English
System Backup Guide
•
You can backup original recovery image through this application in case of
losing by device damage.
•
You can backup original recovery image to USB disk and restore the system if
any storage system replacement with the recovery USB disk.
•
Before you restore the system through the recovery USB disk, please make
sure that you have already made the backup of your data.
•
Please DO NOT shut down or un-plug the system when performing backup
through recovery USB disk.
• Please plug in the USB Flash
Drive which is at least 32GB in
capacity to make the original
image ( backup the data in USB
first. All data will be eliminated
during the creation of recovery
USB disk )
• Insert the driver disk to your
optical drive and run the install of
“System Backup” (for none-ODD
model, please use USB ODD
device or download from
http://www.gigabyte.com
• Run the “System Backup” after
nishing the install.
• Select your USB disk from the
drop-down list and start to create
the recovery USB disk.
• The window will pop out when the creation of recovery disk is done.
• Please press F12 on starting the system when you need to restore the system.
Select “boot from recovery USB disk” and the system will be restored.
• The time needed for restore will be around 30 mins(time needed may vary by USB
disk model) .
1
2
3
4
5
To Next Page
Loading...
Need help?
General
